ULTIMATE Spoil Board Bundle
Includes the Toolpath file to carve a 2x2 grid, concentric circles and a center X in your 32x32 spoil board. Also includes the Toolpath for a squaring jig using 3/4” electrical PVC conduit (the gray stuff) and to carve a grid of 1/4” holes for my hold down method. Lastly, three different surfacing Toolpaths using a 1”, 1.25” or a 1.5” surfacing bit. That’s 8 different Toolpaths you can run separately or as one big carve.
This ZIP file also contains the Vectric VCarve ULTIMATE Spoil Board design file and .DXF, .SVG and PDF files of the design so you can make any changes you require.
NOTE: PLEASE CHECK THE RECOMMENDED FEEDS AND SPEEDS OF YOUR PARTICULAR BITS AND CNC MACHINE. GCODES WERE CREATED USING THE FEEDS AND SPEEDS I USE WITH MY BITS ON MY ONEFINITY.
Includes the Toolpath file to carve a 2x2 grid, concentric circles and a center X in your 32x32 spoil board. Also includes the Toolpath for a squaring jig using 3/4” electrical PVC conduit (the gray stuff) and to carve a grid of 1/4” holes for my hold down method. Lastly, three different surfacing Toolpaths using a 1”, 1.25” or a 1.5” surfacing bit. That’s 8 different Toolpaths you can run separately or as one big carve.
This ZIP file also contains the Vectric VCarve ULTIMATE Spoil Board design file and .DXF, .SVG and PDF files of the design so you can make any changes you require.
NOTE: PLEASE CHECK THE RECOMMENDED FEEDS AND SPEEDS OF YOUR PARTICULAR BITS AND CNC MACHINE. GCODES WERE CREATED USING THE FEEDS AND SPEEDS I USE WITH MY BITS ON MY ONEFINITY.
Includes the Toolpath file to carve a 2x2 grid, concentric circles and a center X in your 32x32 spoil board. Also includes the Toolpath for a squaring jig using 3/4” electrical PVC conduit (the gray stuff) and to carve a grid of 1/4” holes for my hold down method. Lastly, three different surfacing Toolpaths using a 1”, 1.25” or a 1.5” surfacing bit. That’s 8 different Toolpaths you can run separately or as one big carve.
This ZIP file also contains the Vectric VCarve ULTIMATE Spoil Board design file and .DXF, .SVG and PDF files of the design so you can make any changes you require.
NOTE: PLEASE CHECK THE RECOMMENDED FEEDS AND SPEEDS OF YOUR PARTICULAR BITS AND CNC MACHINE. GCODES WERE CREATED USING THE FEEDS AND SPEEDS I USE WITH MY BITS ON MY ONEFINITY.